After long-term use, the hard drive on your Dell, HP, or other brand's laptop may store too much data and run out of storage. Meanwhile, the laptop can operate rather slowly. Some users will replace their old hard drive with a larger and new SSD for disk upgrades and storage expansion.

Cloning, therefore, becomes the best choice. It gives you a 100% identical replica of the old hard drive, including the Windows, system-related files, installed programs, and more. To make this task easier, follow This article from EaseUS to learn how to clone laptop hard drive to new SSD without reinstalling everything from scratch.

What to Prepare Before Cloning Laptop Hard Drives

To clone laptop, clone PC, or clone laptop to PC in Windows 11/10/8/7 can be easy if you have done the preparation work carefully. Follow the instructions below.

⏭︎ 1. Choose the best disk cloning software.

Considering that Windows does not have a built-in cloning tool, a third-party disk cloner is necessary. But with so many choices, which one is your best option?

After comparing various cloning software, we recommend you try EaseUS Disk Copy. This full-packed drive clone helper assists users in transferring files from one drive to another in three simple clicks. After cloning the SSD disk, you can use it directly on your laptop and computers; there is no need to reinstall Windows or anything else.

Key features of EaseUS Disk Copy:

⏭︎ 2. Check the SSD capacity.

Make sure the new SSD drive's capacity is larger than the space used by the old hard drive. Insufficient storage space may cause clone failure or data loss.

⚠︎ Note: If you have saved files to the new SSD, backup SSD to external hard drive or other locations. The cloning process will wipe all data on it.

⏭︎ 3. Check the SSD status.

You are supposed to check if the SSD is initialized before you can use it. Follow the steps:

Step 1. Press Windows + R keys together > type diskmgmt.msc > click OK.

Step 2. Right-click the new SSD > click Initialize Disk. (If the disk is Offline, right-click and select Online.)

Step 3. In the dialog box, select the correct SSD > choose MBR or GPT > click OK.

⏭︎ 4. Prepare a USB to SATA adapter adaptor.

To start cloning, you need to connect the new SSD to your laptop and make it detected. A USB to SATA adapter is required in this process.

⏭︎ 5. Get a screwdriver.

A screwdriver is needed to open your laptop and insert the SSD into the computer case.

Share this post on your social platforms to help more people.

How to Clone Laptop Hard Drive to New SSD (Step-by-Step Guides)

When you finish downloading EaseUS Disk Copy and make all the necessary preparations, let's continue to explore how to clone laptop hard drive to new SSD in Windows.

Part 1. Connect the New SSD to Your Laptop

Start your laptop, use the USB to SATA adapter to connect the new SSD to your laptop, and make sure it can be detected. Then, install and launch the EaseUS Disk Copy.

Part 2. Clone Hard Drive to SSD with EaseUS Disk Copy

Step 1: In "Disk Mode", select the HDD that you want to clone.

Step 2: Select the SSD as your destination.

Step 3: Edit the disk layout and then click "Proceed" to continue.

As the destination is an SSD, you are suggested to tick "Check the option if the target is SSD".

A warning message tells you that the data on the SSD will be erased. Click "OK" to continue if you do not have important data on the destination disk.

Step 4: Wait for the process to complete.

Part 3. Remove the Old Drive and Install the New Drive

After replicating the hard drive to an SSD on the laptop, you need to remove the old hard drive and install the new one.

Please turn your laptop off and unscrew the backside with a screwdriver. Then, find where your old disk is placed, remove it, install the new SSD in the slot, and close the laptop's back lid.

Part 4. Start Your Laptop

Once the new solid-state drive is installed properly, you can restart your laptop. The laptop will boot from the cloned drive automatically. Your notebook will work the same as before, with the same Windows OS, system-related files, configurations, installed programs and apps, etc.

Final Words

How to clone laptop hard drive to new SSD can be a simple task if you have done the preparation work correctly. Right disk cloning software is indispensable for this process. You are advised to use EaseUS Disk Copy to complete this task.

With EaseUS Disk Copy, you can clone HDD to SSD, SSD to SSD, SSD to HDD, or HDD to HDD with simple clicks. You don't need to reinstall the Windows operating system, system-related files, installed programs, configurations, and others from scratch. Download this user-friendly disk cloner and give it a try!

FAQs on How to Clone Laptop Hard Drive to New SSD

Look at the three most asked questions on how to clone hard drive laptop to new SSD laptop.

1. Can you clone a laptop hard drive to SSD?

Yes, you can. Cloning is the best way to upgrade an HDD to an SSD and increase storage capacity. To clone a laptop hard drive to an SSD, you need to download a third-party cloning utility, like EaseUS Disk Copy, and use it to clone all data from the source disk to the target disk.

2. Does Windows 10 have a cloning tool?

Unluckily, Windows 10 computers don't have a built-in disk cloning tool, and Windows 11/8/7 don't either. To clone Windows 10 to an SSD or HDD, you must resort to third-party software like EaseUS Disk Copy.

3. Is it good to clone a hard drive to SSD?

Yes, it is good to clone a hard drive to an SSD. Cloning an HDD to a larger and newer SSD can offer users more disk space, optimized computer performance, and faster running speed.